Specially designed to display online water flow of your systems

- High Accuracy
- Online 16 x 2 Display
- Easy Installation
- Easy Parameters Setup
- Easy to Monitor
- Less Piping Work
- Easy Maintenance
A Perfect Substitute Of Traditional Rota meters
Infinity Flow meter controller has a flow sensor with magnetic multi-blade spinning rotor(impeller) mounted inside at right angles to the flow. the rotational speed of the impeller is proportional to the velocity of the fluid. the pulse generated is transmitted and converted into volumetric measurement. These dispenser are calibrated and to give reliable flow measurement.
-: Flow Sensor’s Easy Size Selection
-: 7A / 230V Relay For Every Tripping
-: Alphabetical 16×2 LCD Display for Easy Monitoring
-: Two different size Flow sensor also can connect and monitor on display
-: Display Total Volume in liter as well m³
-: F1 & F2 both sensors with different sizes like 15,20,25,40,50mm can Support
Settings
- Flow in Liter & Flow in m³ can Set
- Passed Particular Volume (batch) Tripping can Set
- Display Scrolling On / Off can Set
- Display Scrolling Time can Set
- Flow 1 & Flow 2 Size Differently can Set
- Flow 1 & Flow 2 Volume Differently can Set
- Flow 1 & Flow 2 Tripping Differently can Set
Tripping
- High Flow Trip
- Low Flow Trip
- Particular Amount of
- Volume Passed in Batch & Trip
Controller Specifications
- Physical Dimensions : 96(W) x 96 (L) x 53 (D) mm.
- Cut Out Size : 92(W) x 92 (L) mm.
- Enclosure : MSPC
- Mounting : Panel
- Input Supply : 230 V A.C.
- Display : 16X2 LCD Display
- Calibration Point : Using Internal Setting
- Temperature : 0-60 ºC
- Accuracy : ±2% FSD
- Control Relay : 7A @ 230V AC
- Flow Input : From Sensor
- Output : From Relay
Sensor Features
- Accurate
- All Plastic wetted parts
- Easy to install and maintain
- Each sensor calibrated with fitting for k factor (ml/pulse)
- High amplitude output signal from sensor eliminates
- Ceramic Bearing for superior Flow performance
- Field Maintenance easy with threaded housing
Sensor Specifications
- Sensor body : Nylon
- Rotor (impeller) : PP
- Shaft : Carbide
- Bearing : Ceramic
- Sensing Element : Hall Effect I.C.
- Max Pressure : 5 kg/cm²
- Max Temperature : 60°C
- Accuracy : ± 2% of Full Scale

WIRING DIAGRAM
